The best way to get dents out of sports cards is to press them. This will straighten the card and runs no risk of further damage.
Unfortunately, baseball cards are very easily bent out of shape, creased or folded. These imperfections can seriously affect the value of any particular card and are obviously undesirable. Not only do they impede the value but also the look of the card.
Everyone wants their baseball card collection to be in the best condition possible. So, here we will tell you everything that you need to know about removing dents from baseball cards.
Is It Possible to Remove a Dent From a Sports Card?
The answer to this question is not exactly straightforward. It depends entirely on how deep the dent is and the extent of the damage to the card. If there is only light and minimal denting to a card then yes, it is entirely possible to remove the dent or dents.
Unfortunately, if the denting is extensive then there is every chance that you will not be able to remove the dents or at least all of them. You may be able to restore the baseball card to a better condition than it was in originally, but you will not be able to perfect it.
You should consider whether or not the dent has caused damage to the structural integrity of the card. If it has then you will not be able to fix it. Otherwise, keep reading to find out how to fix a dent.
You can fix small dents in baseball cards by using paint to fill the gaps. This is the best method if you do not want to risk further damaging the card.
Lightly fill in the dents with an appropriate paint. However, you should be careful not to apply the paint too thick. Applying too much paint will soften the baseball card for a short while and makes it very easy to cause more damage whilst it is drying.
How to Remove Creases From Sports Cards
Creases can be tricky things to deal with and remove from baseball cards. This is because the card itself is very reluctant to go back to its original shape. Fortunately, there are a few methods that you use to try and restore your baseball card back to its original glory.
The first thing that you can do is to flatten them. You can do this in a variety of ways. The first is to simply use a heavy object and lay the card completely under it. A large book or another such object will work well. Place the card on a flat surface and place the book on top.
You will then need to leave this for a while. You can keep checking every couple of hours to see the progress of your card. In some cases, this will not completely remove the creasing or even the little white lines that are a result of the creases.
Another option is to use an iron. You can place the baseball card on a flat ironing board and then cover it with a piece of fabric before ironing over the top of the fabric. You will need to use a fabric that has a high heat resistance. This will ensure that you do not burn or cause any damage to your baseball card.
You will need to iron it in 30 second intervals, checking to make sure that you are removing the creases in the shortest time possible.
Can You Press a Baseball Card?
In order to remove dents from baseball cards, you can also use a method called “pressing”. It has always been a very popular method to remove all sorts of dents, scratches and creases out of baseball cards. If it is done properly then it should not alter a card’s value or appearance.
You will want to place the card between the two pieces of the pressing device and then screw them closed. This will place a large amount of pressure on the card and essentially force it into a straight position. Doing this will help to straighten out any dents from your baseball cards.
However, it can take a significant amount of time. Obviously, the worse the denting and/or creasing is on a particular card, the longer you will need to leave it in the press. You should only check to see if the press has worked after several hours.
If you keep opening and closing the press to see if it has worked then you run the risk of damaging your card by accidentally catching a part of it (such as the corners) in the press and bending it further.
Instead, consider leaving it for about 12 hours. After all, once it has been straightened out there is nowhere else for it to go. Leaving it a little bit longer will not hurt it.
Obviously, this can be a very timely process, especially if you have a lot of cards that have dents or creases. But it is a time-tested method of easily and assuredly removing the imperfections from your baseball cards. Other methods involving water and heat can easily cause more damage to your cards via the water vapor.
To check the current price and availability of Baseball Card Blaster Boxes, click here to view them on Amazon.
Final Thoughts
Nobody likes to see that they have an imperfect baseball card. The goal is to have your collection in the best condition possible. In order to do this, you may need to fix up a few of the cards that you already have in your deck.
The easiest damage to occur is denting and creasing. There are several methods to remove these problems from a baseball card, but many involve water vapor can you can run the risk of causing more damage to your cards. Instead, it is best to use the pressing method.
Pressing your baseball cards involves no risk. You do not need to be overly careful as long as you press it properly. This will visibly remove almost all dents and creases, leaving you with a much more visually appealing collection.